ColorFabb 20% Carbon fiber XT-CF20 filament 750g
Is it for me?
ColorFabb XT-CF20 is based on ColorFabb XT. It is a general purpose, odor-free, and temperature resistant co-polyester reinforced with 20% carbon fibers.
The addition of carbon fibers gives this filament unique properties. Products printed with ColorFabb XT-CF20 are strong, rigid and durable with high temperature resistance and a highly attractive matt black surface.
This material is great for a variety of industries, such as RC models, drones, aerospace or automotive.
However, XT-CF20 accelerates the nozzle-wear of standard brass nozzles much faster than unfilled filaments. Using a hardened stainless steel nozzle is strongly recommended.
Printing Setup
Nozzle | 240-260 °C |
Heatbed | 50-70 °C |
Basic Attributes
Strong, rigid and durable |
Requires hardened stainless steel nozzle | ||
Loaded with 20% carbon fibers |
Tends to ooze and create nozzle blobs |
||
High-temperature resistance (up to 80°C) |
|||
Low odor / Styrene Free solution |
|||
Highly attractive matt black surface |
Notes
Approximate filament length: 250 m
colorFabb XT filament is produced from Amphora™ 3D Polymer by Eastman Chemical Company by colorFabb.
1.75 mm filament is manufactured with a precision of +- 0.05 mm
We reserve the right to ship weights +/- 5% due to packaging variations.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
Smooth PEI surface preparation! Make sure to apply Kores glue on the smooth PEI before printing. Glue serves as a separating agent and helps to protect the surface when removing the finished print from getting damage. Without the glue, the filament adhesion may be too strong!
Reviews
The Seller does not verify whether the published reviews come from consumers who have actually used or purchased the products or digital content or service. Reviews are provided by registered PRUSA ACCOUNT users.
Downloads
- Technical Data Sheet618 kB