Gamma aggiornata: Prusa XL+, CORE One+ (Gen 2), CORE One L+!

USD ($)

Enclosure for Prusa XL+

Loading...
Porta la tua Prusa XL+ al livello successivo con questo kit di aggiornamento facilissimo da installare! Goditi una qualità di stampa superiore e un'esperienza d'uso ancora più fluida grazie alla sigillatura migliorata della camera, che mantiene naturalmente la temperatura fino a 50 °C tramite il piano riscaldato. Vuoi temperature ancora più elevate? Il prossimo riscaldatore esterno spingerà le temperature fino a 60 °C.
Le spedizioni inizieranno il 4 settembre.
Le spedizioni inizieranno il 4 settembre.
$795.37
Loading...
$795.37Loading...

IDF: 28325|IDS: 4183

Enclosure for Prusa XL+For large engineering parts without warping

Better sealing keeps the chamber heated up to 50 °C from the XL+ heatbed alone. The upcoming external heater can take that to 60 °C. The Enclosure for Prusa XL+ offers HEPA filtration, quieter prints, and full control from the printer menu.

At a Glance

Large ASA, ABS, PC, and Nylon parts shrink as they cool. If the air around them is cold and drafty, corners lift and may ruin the print. A sealed chamber slows that cooling so the part can finish the way you sliced it.

The enclosure for Prusa XL+ is an add-on designed specifically for the Prusa XL+ 3D printer. It is not compatible with the Original Prusa XL.

50 °C
just from heatbed
Better sealing traps heat from the XL+ heatbed
60 °C
With external heater
Upcoming addon for Enclosure for Prusa XL+ allowing printing with more advanced materials
99.9%
HEPA filtration
Cuts odors and ultra-fine particles from all filaments
Easy control
Through printer's touchscreen
Set filtration performance, check HEPA filter life, control the LED strips, and read the chamber temperature
Low warping
when printing large models
ABS, ASA, PA, PC, PP and other advanced materials can be printed with lower risk of warping, thanks to the elevated temperatures
Foldable bellow
for low-temperature materials
Some materials prefer cooler air. The magnetic bellows cover folds open for better airflow when you print PLA or PETG

Built around how you actually print

Everything useful from the XL Enclosure, with sealing improved for higher chamber temperatures and full readiness for XL+.

Original Prusa XL Enclosure installed on the printer, rear three-quarter view

Sealing that holds the heat in

The Enclosure for Prusa XL+ improves sealing to maximize heating efficiency. In practice, the chamber temperature heats up to about 50 °C with just the heatbed. On large parts, that warm air is what keeps the corners down, especially with ASA, ABS, PC, Nylon, and PCCF.

HEPA filtration unit on the XL Enclosure

Filtration that runs with the print

The Advanced Filtration System draws air from inside and pushes it through a HEPA filter (99.9% efficiency). That cuts odors and ultra-fine particles when you print ABS, ASA, PA, and similar materials. Filtration is controlled from the printer menu, including post-print run time.

Close view of a print job inside the enclosed XL

Plugs into the XL+ mainboard

The Enclosure connects to the XL+ mainboard. From the touchscreen, you set filtration performance, check HEPA filter life, control the LED strips, and read the chamber temperature. An extra LED strip syncs with the printer for print-area light and status indication.

Magnetic bellows cover folded open on the XL Enclosure

Fold the bellows for cooler ambient temperature

Some materials prefer cooler air. The magnetic bellows cover folds open for better airflow when you print PLA or PETG, without swinging doors that eat up floor space. You keep access to the whole bed, then seal up again when the next job needs heat.

Top view of the XL Enclosure lid and frame

Metal frame, add‑on ready

Metal frame, Plexiglas panels, mounting points for cameras, electronics, and tidy cable routing. The enclosure also lowers printer noise and covers moving parts. Shipped as a kit with everything included - no printing required.

Large part printing inside the XL Enclosure

Perfect fit for advanced materials

Warping on technical filaments is mostly thermal shock: hot plastic meeting cold room air. A stable, warmer chamber reduces that gradient. You get fewer failed large prints, less residual stress in finished parts, and much easier printing of the materials that refuse to behave on an unenclosed printer.

Original Prusa Enclosure on an XL printer
Why 50 °C and 60 °C matter

Higher chamber temperature is what enables reliable printing of large technical components

On open printers, room air cools each layer too fast. On XL-scale parts, that shows up as lifted corners and weak layer bonds.

A temperature around 50 °C is already in the useful range for ASA and ABS, and it helps a lot with Polyamide and many PC jobs. The part cools slowly, reducing the internal stress while the print is still running.

Around 60 °C (with the upcoming external heater add-on), you move into the temperature range recommended for printing polycarbonate and larger Nylon parts, where interlayer bonding and dimensional stability improve further.

Package contents

Frame and panelsMetal frame parts, transparent side panels, top and front panels
AccessBellows set cover (magnetic)
ElectronicsTemperature sensor, LED strip, wires
HardwareMounting material, printer frame brace
DocumentationAssembly manual
Tools neededT10 Torx, 1.5 mm and 2.5 mm Allen keys, needle-nose pliers, universal wrench

Shipped as a kit. A 3D printer is not included. Tools for assembly can be added to the order.

Technical parameters

Dimensions (installed)700 × 900 × 720 mm (W × H × D)
Enclosure typePassive (heat from XL+ heatbed), compatible with upcoming external heater addon
Chamber temperatureUp to ~50 °C with heatbed; up to ~60 °C with external heater addon
FiltrationAdvanced Filtration System, HEPA 99.9% efficiency
Weight15.7 kg (34.6 lbs)
AssemblyInstalls on the printer. Can be removed if needed
CompatibilityPrusa XL+

Installed footprint matches the XL Enclosure platform. The Enclosure for Prusa XL+ adds improved sealing for higher chamber temperatures.

Common questions about the Enclosure for Prusa XL+

Practical answers for people who print large technical parts.

Recensioni