United States
What can you expect?
Prusament Refill is an environment-friendly way to refill your empty Prusament spool. Once you run out of Prusament and the spool is empty, simply remove the spool's sides and attach them to Prusament Refill.
Every Prusament Refill we made is up to the high quality standards of our in-house made filaments and is well-secured for transport, so you don't have to worry about tangled spools. You can find more about our sustainability activities in our sustainability report.
To install a new Prusament Refill spool please consult our step-by-step user guide.
Prusament PETG is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool!
Manufactured In-House By Josef Prusa
We were not satisfied with the quality of filaments on the market. So we decided to make our own! Prusa Research is the only 3D printer manufacturer with its own filament production.
Premium-Grade Materials And Thorough Testing
The whole manufacturing process is closely monitored and tested – string diameter, color consistency, and mechanical properties – to make sure that every spool is perfect.
± 0.02 mm Manufacturing Guaranteed Precision
We believe the industry standard of 0.05 mm isn’t sufficient for perfect 3D printing. Instead, we guarantee ±0.02mm precision and highly-consistent colors in our filaments.
High Quality You Can Check Yourself
We are the only manufacturer that gives the option to inspect parameters of every filament spool. Scan a QR code on the spool to see all details online (check the sample spool).
Read more about Prusament in the article at blog.prusa3d.com or Prusament.com!
About PETG
Printing Setup
| Nozzle | 250 °C |
| Heatbed | 70-90 °C |
| Recommended Steel Sheet | Textured / Satin |
Basic Attributes
Low shrinking and warping
Possibility of stringing
Poor bridging characteristics
Notes
This PETG is made in-house by Prusa Research.
1.75 mm filament is manufactured with precision of +- 0.02 mm
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
To dry the filament, please follow the instructions in our article. The inner diameter of the cardboard spool is ± 94 mm (3,7″) and the width is ± 60 mm (2,36″).
