Rapid prototyping
Prototype in standard materials like PLA, PETG, or ASA in just hours. Bypass outsourcing delays and validate ergonomics and mechanical fit fast enough to run multiple design cycles in a single shift.
Print large jigs, fixtures and production parts.
Functional and design parts, from a single piece to hundreds.
Featured printers
All three share the same support, warranty and free software.
Recommended
Prusa CORE One+
Trustpilot: Excellent, 4.5 out of 5
Functional and design parts, from a single piece to hundreds. A 250×220×270 mm print volume and a chamber that heats up to 55 °C.
From $1,299
Best seller
Prusa CORE One L+
Trustpilot: Excellent, 4.5 out of 5
A 300×300×330 mm print volume and a chamber that heats up to 60 °C, so tough engineering plastics cool evenly without warping or cracking.
From $1,999
Prusa XL+
Trustpilot: Excellent, 4.5 out of 5
A large-format workhorse. Its 360×360×360 mm bed prints big parts in one piece, and up to five toolheads mix materials in the same print with almost no waste.
From $2,299
From concept to end-use part in days
One 3D Printer covers the full product development cycle.
Jigs and fixtures
Skip lengthy and expensive third-party suppliers. Design, test and iterate in mere hours - on-site.
Products and custom orders
Functional and design parts, from a single piece to hundreds. Print in ASA and other engineering plastics, with a chamber that heats up to 55 °C.
Customer stories
These teams already run our printers in production.
Customer story Seco Tools
The Swedish tool maker’s Czech branch was asked to unblock a gearbox line where one part needed three ISO tools and almost 51 seconds. A single combined tool, printed 1:1 before it was ever cut, brought the operation to 40.2 seconds, Škoda Auto’s figure, on Škoda Auto’s line.
- 4 daysassignment to 1:1 printed model
- 10.7 scut from Škoda’s cycle time
- 3 to 1ISO tools proved in one printed cutter
“Thanks to 3D printing, I rediscovered my passion for innovation and industrial tool design.”
1 / 7
3D printers for Small Business
Why small teams bring production in-house with Prusa
Pays for itself
Most useful parts cost a few dollars in filament. Outsourced, the same part is a quote and a week away.
Customer storiesRuns unattended
Machines built to run overnight, day after day. Under 1% of printers ever raise any warranty claim.
See the farmYour data stays in
No cloud account required. Every printer runs fully offline on your own network.
Trust CenterNo lock-in
Free open-source PrusaSlicer, no per-seat licenses, any standard 1.75 mm filament.
PrusaSlicer
Compare 3D printer models
| CORE One+ (Gen 2) | CORE One L+ | XL+ | |
|---|---|---|---|
| Price | From $1,299 | From $1,999 | From $2,299 |
| Build volume | 250 × 220 × 270 mm | 300 × 300 × 330 mm | 360 × 360 × 360 mm |
| Max nozzle temp | 290 °C · 400 °C with the HT hotend | 290 °C · 400 °C with the HT hotend | 290 °C |
| Heated bed | 120 °C | 120 °C | 120 °C · segmented into 16 individually controlled tiles |
| Heated chamber | Up to 55 °C | Up to 60 °C | no · up to 50 °C with the optional Enclosure, 60 °C with its external heater |
| Materials | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and ABS, ASA, HIPS and PA in the sealed chamber | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA with Advanced Filtration | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB and carbon-fibre composites |
| Best at | The reliable all-rounder | Big parts, and long runs of them | Large parts, five colours or materials in one job |
Price
CORE One+ (Gen 2)
From $1,299
CORE One L+
From $1,999
XL+
From $2,299
Build volume
CORE One+ (Gen 2)
250 × 220 × 270 mm
CORE One L+
300 × 300 × 330 mm
XL+
360 × 360 × 360 mm
Max nozzle temp
CORE One+ (Gen 2)
290 °C · 400 °C with the HT hotend
CORE One L+
290 °C · 400 °C with the HT hotend
XL+
290 °C
Heated bed
CORE One+ (Gen 2)
120 °C
CORE One L+
120 °C
XL+
120 °C · segmented into 16 individually controlled tiles
Heated chamber
CORE One+ (Gen 2)
Up to 55 °C
CORE One L+
Up to 60 °C
XL+
no · up to 50 °C with the optional Enclosure, 60 °C with its external heater
Materials
CORE One+ (Gen 2)
PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and ABS, ASA, HIPS and PA in the sealed chamber
CORE One L+
PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA with Advanced Filtration
XL+
PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB and carbon-fibre composites
Best at
CORE One+ (Gen 2)
The reliable all-rounder
CORE One L+
Big parts, and long runs of them
XL+
Large parts, five colours or materials in one job