United StatesDouble-sided Powder-coated PA Nylon Spring Steel Sheet (FACTORY SECOND)
Double-sided Powder-coated PA Nylon Spring Steel Sheet for Original Prusa i3 MK3/S/+ and MK2.5/S heatbeds.
This is a FACTORY SECOND product. It is rated as factory second due to cosmetic and visual defects only. The cosmetic and visual defects do not impact functionality. FACTORY SECOND products are completely unused.
Factory second product, fully functional with cosmetic and visual imperfections
Hairline scratches, visual imperfections of the graphics (missing, blurred), imperfections on the print surface (dents, bumps)
Not compatible with
OVERVIEW:
The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.This print sheet is specially designed to print polyamide-based filaments, especially the Prusament PA11 Carbon Fiber Black. The PA11-type materials have generally a lower adhesion on textured or satin print sheets. This sheet has a special surface finish that increases the adhesion and is perfect for Prusament PA11.
You can learn more about the Double-sided Powder-coated PA Nylon Spring Steel Sheet in our knowledgebase.
IMPORTANT!
The surface of this sheet should be cleaned only with pure water. Using common agents such as IPA or Acetone will lead to a quick deterioration of the surface. Using a glue stick is no longer required and recommended. To clean grease-coated areas, use clean water with a drop of dishwashing detergent.Note:
As a result of the temperatures to which the plate is exposed during printing, its surface gradually becomes glossier or may develop smaller, duller areas. This visual change does not adversely affect the printing properties and is not considered a reason for a warranty claim.Factory second product, fully functional with cosmetic and visual imperfections
- Hairline scratches
- Visual imperfections of the graphics (missing, blurred)
- Imperfections on the print surface (dents, bumps)
ATTRIBUTES
| Great for polyamide-based materials | Suitable only for polyamide-based materials and PETG. Other materials tend to detach mid-print | ||
| No need for a glue stick | Can be damaged with IPA and acetone | ||
| Can be cleaned just with water | Factory second, fully functional with cosmetic and visual imperfections |
Reviews
The Seller does not verify whether the published reviews come from consumers who have actually used or purchased the products or digital content or service. Reviews are provided by registered PRUSA ACCOUNT users.
