Prusa XL to Prusa XL+ Upgrade - 1 Tool Head

The XL features key upgrades that deliver faster print speeds, superior output quality, and a smoother, more reliable user experience. Meanwhile, the XL+ expands capability even further with an actively heated chamber ready for temperatures up to 60 °C. Through it all, the XL series maintains its position as the largest, most capable toolchanger on the market.

How many toolheads do i have?

How many new Dwarf boards do i need?

Nozzles included

Shipping starts on September 4th.

$249.07

IDF: 27978|IDS: 4192

Original Prusa XL to Original Prusa XL+ Upgrade kit

Please note: early XL models may require new Dwarf boards - see below.

What's new in XL+

The XL received a number of important upgrades that make the user experience and print quality better, speeds faster, and operation easier and even more reliable.

Faster calibration

The XL aligned its toolheads with a mechanical pin - accurate, but lengthy. The XL+ uses a dedicated electronic sensor to align toolheads fully automatically.

Faster printing

The XL+ prints 10–15% faster than the XL. On a 60-hour prop print, that's roughly eight hours back - one more evening in the workshop, or one more batch per day in production.

New Belts for Better Quality

The new GT1.5 belts also bring a visible improvement. They help make fine repeating artifacts less noticeable, which is especially useful on the large, smooth surfaces the XL is often used to print.

Cooling rebuilt for long runs

New, improved cooling on individual toolheads leads to perfect print quality and outstanding overhang performance - your prints will look better and you'll need fewer supports. Plus, there are additional fans and heatsinks to cool down the electronics.

A Nozzle Wiper

At the start of every print, every nozzle is cleaned using the nozzle wiper - more precise pre-print calibration, better looking prints.

A reliable firmware foundation

Every feature we shipped across the whole Prusa lineup since the XL launched is in the XL+ out of the box.

Dwarf board serial number in a format 08|XXXX-XX|xXX

Not all Dwarf boards are upgrade-compatible

Please check the Dwarf board serial number before placing an order

Locate the Dwarf board serial number on all your toolheads to find out whether it's compatible with this upgrade.

If your Dwarf board is marked with a number 07 or lower, it is necessary to replace it with a new one before upgrading. Dwarf boards marked with 08 and higher are compatible with this upgrade.

What you get with the upgrade

Smoother-Looking Surfaces

New GT1.5 belts make unwanted repeating patterns finer and harder to notice, especially on large, smooth surfaces where even subtle artifacts can stand out.

What you get with the upgrade

A Nozzle Wiper

At the start of every print, every nozzle is cleaned using the nozzle wiper - more precise pre-print calibration, better looking prints.

What you get with the upgrade

Tougher, Better Plastic parts

New plastic parts are made from PC and PCCF to withstand elevated temperatures in the enclosure.

What you get with the upgrade

Automatic Tool Offset Calibration

Fully automated, twenty times faster process of tool offset calibration - and even more precise than before.

What you get with the upgrade

Improved Cooling in Every Aspect

Print cooling on par with the award-winning MK4S and CORE One printers. Reworked cooling of printer's critical components for reliable operation in demanding conditions.

What are my Enclosure options?

If you already own the original Enclosure for Prusa XL, you can keep it even when you upgrade to Prusa XL+ because it is fully compatible. However, it won't reach 50°C like the new one.

I have XL+ without enclosure

Full Enclosure for XL+
Only works with XL+

Get it now

I have the original XL Enclosure

When you already own an enclosure, you can upgrade it to the new one
You need to update your XL to XL+ too - because the increased temperatures in the case require PC / PCCF parts

Get it now

Coming Soon

Brings the chamber temperature to 60°C
Only compatible with Enclosure for XL+ and Prusa XL+ due to more durable materials used

Coming Soon

The Only End-to-End EcosystemUnlock Prusa’s unique toolset

Prusa’s the only place that has your entire 3D printing workflow covered with free, open solutions. From remote printing with your phone to robust print farm management, you can safely stay in one reliable environment.

Printables.com

A global community platform for sharing and discovering 3D models. Free to use, filled with inspiration.

Visit printables.com

EasyPrint

Innovative web-based tool for seamless 3D model slicing. Send sliced models directly to your Prusa printer in just a few clicks from Printables or the Prusa mobile app.

Learn more about EasyPrint