Shipping to
United States
MK4 kit shipping from $50 (DHL)

ColorFabb Steelfill filament 750g

Is it for me?

Steelfill is on its base just a regular PLA. But the addition of metallic powder allows for really interesting looks. Your prints will look interesting even without post-processing with a distinct matte look. But the really interesting thing is that you can polish these prints and mimic a shiny metallic look. Please use corresponding print settings in PrusaSlicer print parameters can be very different depending on the plastic base.

It’s important to note that the metal particles inside the filament can be very abrasive for a regular brass nozzle. If you plan to print just a tiny model, you don’t have to switch the nozzle, but for anything bigger, it’s better to switch to a hardened steel nozzle.

The first step in polishing is sanding. It’s a good idea to start with a coarse grit size (80) and slowly move up the grit table. After sanding a big improvement in polish can be achieved with steel wool or brass brush. If you’re still not happy with the finish, you can try wet sanding with a very fine grit (1500).

Printing Setup

Nozzle190-210 °C
Heatbed50-70 °C *

larger object means higher temperature

Basic Attributes

Easy to print

Needs hardened nozzle

No warping


Great look after post-processing



This filament is produced by colorFabb.

Length of the filament: 80 m

We suggest to use hardened steel nozzle with this filament. 

1.75 mm filament is manufactured with precision of +- 0.05 mm

We reserve the right to ship weights +/- 5% due to packaging variations.

Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook

In stock

Preparation time: 1-3 business days.

Visa, Mastercard, American Express, PayPal, Apple Pay, Google Pay, iDeal, Diners Club, girocard, Sofort, Trustly, DHL, FedEx, Dpd, Packeta, Zásilkovna