What can you expect?
Prusament Refill is an environment-friendly way to refill your empty Prusament spool. Once you run out of Prusament and the spool is empty, simply remove the spool's sides and attach them to Prusament Refill which comes wound on a spool core.
Every Prusament Refill we made is up to the high quality standards of our in-house made filaments and is well-secured for transport, so you don't have to worry about tangled spools.
You can find more about our sustainability activities in our sustainability report.
How to fit Prusament Refill spool
The Prusament spool consists of black plastic sides and a cardboard centerpiece. The sides are pushed on the centerpiece and can be removed to reuse or recycle. Please note there are also gray Prusament spools used for high performance. Those are glued to the cardboard centerpiece as some filaments require drying up in high temperatures.
The trick to easily separate the center of the spool from the plastic sides is to rotate the spool. Pull the ends of the spool apart using a reasonable amount of force and gradually rotate the spool bit by bit. Thanks to this movement, it will be easier to separate the sides from the center of the spool.
More detailed instructions on how to fit the Prusament Refill spool can be found on the help.
Prusament PLA is our own in-house made filament. The whole manufacturing process is closely monitored and tested - we guarantee ±0.02mm precision (± 0,03 for blends) and highly-consistent colors. You can inspect parameters of every spool we made at prusament.com. Check the sample spool!
Manufactured In-House By Josef Prusa
We were not satisfied with the quality of filaments on the market. So we decided to make our own! Prusa Research is the only 3D printer manufacturer with its own filament production.
Premium-Grade Materials And Thorough Testing
The whole manufacturing process is closely monitored and tested – string diameter, color consistency, and mechanical properties – to make sure that every spool is perfect.
± 0.02 mm Manufacturing Guaranteed Precision
We believe the industry standard of 0.05 mm isn’t sufficient for perfect 3D printing. Instead, we guarantee ±0.02mm precision (± 0,03 for blends) and highly-consistent colors in our filaments.
High Quality You Can Check Yourself
We are the only manufacturer that gives the option to inspect parameters of every filament spool. Scan a QR code on the spool to see all details online (check the sample spool).
Read more about Prusament in the article at blog.prusa3d.com or at Prusament.com!
PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter. Only this material is proven for 50 microns layer height.
However, PLA is not a perfect material and, just like every other plastic, has some disadvantages. The low melting temperature also means low-temperature resistance. Parts start to lose mechanical strength at temperatures over 60 °C.
The combination of being low in UV and temperature resistance means that it’s not ideal for outdoor use. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better off using just glue.
Even though PLA is on its own food safe, we do not recommend repeatedly drinking or eating from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating. When post-processing PLA, it’s better to use wet sanding. Without water, you'll quickly start heating the plastic by friction, which will cause it to soften and make it hard to keep sanding.
|Easy to print
|Can print tiny parts
|Low temperature resistance
|Can print huge objects
|Hard and tough
This PLA is made in-house by Prusa Research.
1.75 mm filament is manufactured with precision of ± 0.02 mm (±0.03 for blends)
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.To dry the filament, please follow the instructions in our article. The inner diameter of the cardboard spool is ± 94 mm (3,7″) and the width is ± 60 mm (2,36″).
The Seller does not verify whether the published reviews come from consumers who have actually used or purchased the products or digital content or service. Reviews are provided by registered PRUSA ACCOUNT users.